BidBench

Pricing & getting started

Open a sample bid, check its numbers, then use your own drawings and supplier quotes.

Your first bid

  1. Open the duct sample. In the itemized estimate, filter to Ductwork. Find the 20-foot run of 24 × 12-inch rectangular duct on sheet M-101.
  2. Check the takeoff. The four sides total 6 feet around. Multiply by 20 feet of run to get 120 square feet of net sheet area. Seam allowances, fittings, and waste can add to the material a shop needs.
  3. Review the customer price. The sample uses a Viega elbow and Armacell sheet at manufacturer list. Its partial total is $3,432.61 including markup. Enter distributor prices for copper pipe and rectangular duct to complete it. Open Finish & send proposal, confirm the trade scope, and preview the customer proposal. Open Internal exports to inspect hours, material, and markup.
  4. Start your own estimate. Add a drawing, select a trade, and set the scale from a known dimension. Trace a run or count fittings. Review the rate source, labor, and scope before issuing the proposal.

Drawings & prices

Prepare the plan

Use a current browser with JavaScript and site storage enabled. A larger screen makes detailed takeoffs easier. Upload a PDF, PNG, JPEG, or WebP file up to 60 MB. For a PDF set, choose specific page numbers or ranges. For a CAD or office document, export the relevant sheet as a PDF first.

Choose a legible sheet with a labeled dimension in the area you will measure. Calibrate each sheet and check a second known dimension. Keep the original drawing set for reference.

Import a price catalog

Open the price catalog with the Eastbank sample

Open an estimate and choose Price catalog → Import CSV. Select the file profile and source, check the column mapping and units, then review changes before committing. Manufacturer lists support discounts. A distributor net price already includes your negotiated price. Job quotes can be promoted to your own catalog.

For piping, export the relevant worksheet as UTF-8 CSV from an authorized Viega download or ASC U.S. price sheet. For ductwork, request a dated Sheet Metal Connectors quote. For insulation, use your supplier’s current file and verify whether a price is per foot or per piece.

In the Items tab, select an item and link it to an existing bid line or add it to the estimate. Set a discount in Pricing settings. A linked line carries the source and effective date into the internal estimate. The included TESTCO CSV contains eight fictional test prices. To verify the math on the Eastbank sample, import that file, then choose Link test prices to sample. The 20-foot duct run at $21 per foot totals $420 in material. A 40% TESTCO discount brings it to $252.

Your catalog, discount rules, distributor net prices and licensed labor data stay in this browser’s workspace. Sharing a community list price requires a separate opt-in. Project backups and team revisions that you choose to share contain the estimate’s internal costs.

Choose a cost source

Manufacturer rows show the published list, unit and effective date. Unmatched starter items need a distributor price. Use your supplier’s dated quote, your company’s cost history, or data you are authorized to use. Check the pricing unit, whether labor is included, and whether the rate is before markup.

Record the duct standard edition required by the project and the construction details you priced. When using RSMeans, enter the relevant edition, line reference, and authorized rates. The standard and cost book are obtained separately. Read the estimating reference guide.

Estimating tools

Compare supplier quotes
Import supplier CSVs, check matching items and units, then select the material rates to apply. Review the estimate impact before accepting a change.
Reuse a piping scope
Start with a straight run, isolation valve station, or pump connection. Adjust counts, materials, labor, and optional pipe insulation. Save the recipe for your next bid.
Build a duct assembly
Enter duct dimensions, allowances, insulation layers, shop and field labor. Review the itemized quantities and costs before adding them to the bid.
Review an addendum
Open the revision review on the affected sheet. Align the revised drawing against the original, verify the alignment, then check which measured items need updating.
Report by area or cost code
Assign codes to the estimate rows, check the unassigned items, and choose a grouping in the cost report. Use the workbook for internal review.

Send a client proposal

Open Finish & send proposal in the estimate. Enter the client, choose the trade scope, and add any inclusions, exclusions, terms, or expiration date. Under Customer pricing, choose a selling-price breakdown for materials, labor and equipment, or select a lump sum. Preview the scope and total, then choose Complete bid & issue proposal. Each revision keeps the price and scope you issued.

Choose Open email draft with link to send from your mailbox, or download the branded email draft with the PDF attached. Anyone with the active client link can view, download, or print the proposal without signing in. Open Issued proposals to revisit a version or revoke its link.

Seats using an @amikansas.com sign-in email issue proposals with American Mechanical’s logo and contact information. Other seats use their registered company name. Guests can issue and share proposals under the BidBench name. View the AMI sample proposal.

Storage & team access

Keep a recoverable copy

Guest estimates, supplier quotes, and the price book stay in this browser. Signed-in seats have their own separate workspace. Use My seat to recover earlier estimates saved on this device. Before clearing site data or changing computers, open Project files and download a project backup. Restore the file from My estimates to create a separate copy with its drawings, pricing, and takeoff marks. Each backup covers one project. Team uploads support project files up to 24 MiB. Larger estimates can be handed off as project files.

Hand off a team revision

Sign in with ChatGPT to publish team projects. Add each teammate by sign-in email as a reviewer or editor. Reviewers can open their shared project without creating an estimator seat. Choose when to publish a revision from your local estimate. Give the estimator the appropriate project permission and share the project link. They can open the published revision from their own browser. Later local edits reach the team when you publish again.

Troubleshooting

My measured length looks wrong

Check the active sheet and the drawing scale. Calibrate using a known dimension, then measure a second marked span. If an inset uses a different scale, open Scale regions and calibrate the inset against its own known dimension.

My bid total differs from my worksheet

Match the trade scope first. Then check the pricing unit, equipment, labor, and markup. A 20-foot duct might be priced on 120 square feet of sheet, while a duct item bought by weight uses pounds.

The browser says my changes could not be saved

Keep the estimate open and download a project backup. Check free space and site-storage permissions, or restore the backup as a separate estimate in a regular browser window. If another tab edited the project, keep a backup of the open work before reloading.

I opened a team link and cannot see the estimate

Sign in using the account that was granted access, then reopen the link. Ask the project owner to check your permission and verify that the revision you need has been published.

Start an estimate